I made another attempt to erase the RITEK BW1 disc. This one is a new disc, empty and unformatted.
As you can see from the log, it takes more than 2 hours to do FULL ERASE. The first 5-7 mins, the drive blinks constantly. Then it stops for few minutes (about 10 mins), then blinks again. Stop and blinks again. The status bar during this time is "Erasing disc...". After around 1hr 30 mins, it started counting 1% up to 100% and done. Looks good, so it's strange that the newer LG GGW-
H20 can't erase the disc while the older GGW-H
10N can.
Quote:
10:27:13 ImgBurn Version 2.4.0.0 started!
10:27:13 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
10:27:13 Total Physical Memory: 2,096,164 KB - Available: 983,664 KB
10:27:14 Initialising SPTI...
10:27:14 Searching for SCSI / ATAPI devices...
10:27:14 Found 6 DVD±RWs, 2 DVD±RW/RAMs, 1 BD-RE and 1 BD-RE/ HD DVD-ROM!
10:27:31 Operation Started!
10:27:31 Device: [6:0:0] HL-DT-ST BD-RE GGW-H10N 1.03 (O: ) (SCSI)
10:27:31 Media Type: BD-RE (Disc ID: RITEK-BW1-01) (Speeds: 2x)
10:27:31 Quick Erase: No
10:27:31 Erasing Disc...
12:42:24 Synchronising Cache...
12:42:24 Operation Successfully Completed! - Duration: 02:14:53
|