Club CDFreaks - Knowledge is Power - View Single Post

*Audials Support* · 20-09-2007

Hello

stoybin1203, make sure that your Sound card drivers are up to date with Vendors support/downloads website .....
Could you maybe tell me what type of Sound card do you use ? ..
If Tunebite still fails to autodetect your Sound card after Update , please try the following :

1. Unistall Tunebite from your PC , then begin installation again. Only when installation setup arrives at the point when it will try/ask for detecting the Sound card and then Video test , please cancel the autodetection process.

2. Exit Tunebite

3. Go to Tunebites installation path (by default it would be -> C:\program Files\Tunebite\ .. and search for the file "Config.ini" ... edit the file and search for the line "ConfigRunWizard=1" ->> here you must make sure that the value is "1" so if you have "0" please change it to "1" as mentioned before.

4. Now you must start Tuenbite and go to Tunebites Options -> Record -> click on the button "Detect Capacity" to install the HighSpeedDubbing devices.

5. Do a short test with a audio or video file .. and see whether you obtain good audio/video quality .

Also, please reply with detailed information regarding your PC configuration status :
1. OS version ?
2. TB version ?

20-09-2007	#8 (permalink)
Audials Support Tunebite support Join Date: Feb 2007 Posts: 25	Re: Can't configure sound card in tunebite Hello stoybin1203, make sure that your Sound card drivers are up to date with Vendors support/downloads website ..... Could you maybe tell me what type of Sound card do you use ? .. If Tunebite still fails to autodetect your Sound card after Update , please try the following : 1. Unistall Tunebite from your PC , then begin installation again. Only when installation setup arrives at the point when it will try/ask for detecting the Sound card and then Video test , please cancel the autodetection process. 2. Exit Tunebite 3. Go to Tunebites installation path (by default it would be -> C:\program Files\Tunebite\ .. and search for the file "Config.ini" ... edit the file and search for the line "ConfigRunWizard=1" ->> here you must make sure that the value is "1" so if you have "0" please change it to "1" as mentioned before. 4. Now you must start Tuenbite and go to Tunebites Options -> Record -> click on the button "Detect Capacity" to install the HighSpeedDubbing devices. 5. Do a short test with a audio or video file .. and see whether you obtain good audio/video quality . Also, please reply with detailed information regarding your PC configuration status : 1. OS version ? 2. TB version ? __________________ Audials - music software and more...