doesnt look good but thats not surprising considering the burst rate is way too low and also the read speed (should max around 48x considering your drive is an oem liteon SHW-160H6S) , check the DMA
http://club.cdfreaks.com/showthread.php?t=101616
also be aware that an 80 wires ide cable must be used for this burner to work properly , theres a simple way to determine if the cable your using is 40 or 80 wires , colors , in a 40 wires ide cable all the connectors are black while on an 80 wires ide cable each connector have a diffrent color blue/grey/black