Hi,
I'd like to flash my LH-20A1H from LL06 to latest (LL0A?).
Currently running Linux.
The Flash Utility starts under wine in seems to detect one of my drives OK.
S:_NEC DVD+-RW ND-2510A 205C 05072100
However the Liteon does not appear.
The following error appears on the console :
Code:
[lordy@morpheus liteon-LH20A1H]$ wine Flash_Utility.exe
err:reg:SCSI_getprocentry SCSI type line scan count error (fscanf returns 1, expected 2)
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 0.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 1.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 2.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 3.
I dont mind risking my Liteon if I can get this flashed under Linux.
I'd try to readFlash first
Is there a debug mode or something I can try? Or open source
I wouldnt mind helping with a port? Anything ?!?!
[I was so used to flashing my NECS from Linux I forgot to factor that in when I bought this on Sunday]
-- edit
Unhooked my NEC. Reran and now no devices detected (but Liteon is present as /dev/hda)
But a lot more output this time...
Code:
err:reg:SCSI_getprocentry SCSI type line scan count error (fscanf returns 1, expected 2)
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 0.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 1.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 2.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 0.
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 0.
// aspiSay: x 0 82:00:00 FF E (aspi status BufLen SenseLen)
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 0.
err:aspi:SCSI_GetDeviceName Could not open HKLM\HARDWARE\DEVICEMAP\Scsi\Scsi Port 0\Scsi Bus 0\Target Id 0\Logical Unit Id 1
// aspiSay: x 0 82:00:00 FF E (aspi status BufLen SenseLen)
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 0.
err:aspi:SCSI_GetDeviceName Could not open HKLM\HARDWARE\DEVICEMAP\Scsi\Scsi Port 0\Scsi Bus 0\Target Id 0\Logical Unit Id 2
// aspiSay: x 0 82:00:00 FF E (aspi status BufLen SenseLen)
Repeat last error for all adapters 0-2, Target ID 0-7, Logical Unit 0-7
Then finally..
Code:
fixme:aspi:SendASPI32Command ASPI: Partially implemented SC_HA_INQUIRY for adapter 2.
err:aspi:SCSI_GetDeviceName Could not open HKLM\HARDWARE\DEVICEMAP\Scsi\Scsi Port 2\Scsi Bus 0\Target Id 7\Logical Unit Id 7
// aspiSay: x 0 82:00:00 FF E (aspi status BufLen SenseLen)
aspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name readaspiReadName: impossible name read
Maybe a native Linux flasher will be best. meanwhile I wonder of you can flash via vmware? Are there any Windows based flashers whose code I can look at?
Cheers,
Ydrol