I upgraded my motherboard recently, havn't had a chance to do any burning since then. The burning was working fine beforehand.
The other day I started backing some files up, I do all my burns at 8x with +R media, usually with
Nero 6.6.0.13, on a BenQ 1620.
I insterted a blank dvd, the drive didn't recognise it. What gives? So I ejected it and tried again, this time it picked it up.
I'm fairly sure that burn went ok, but the second dvd that I tried to burn was slow (took about 30min to burn and authenticate rather than 15 or so), and there were burn errors, big chunks of 50-100 sectors.
Restarted the computer with a bit of success; half a dozen burns without dramas. Then the same problem, randomly slowed down burn speed, errors when checking.
When this happens, the bar will get stuck at 1% for a few minutes, make some ab-normal spinning noises (like stuttering, rather than just building up speed as normal burns do). After a few minutes it'll start the burning (at a slower speed ofcourse), with the clock ticking down like normal. When it reaches about 25% complete, the timer will say 0:00 burn time left...
This has happened about 5 times now, losing too many dvds. I have also checked to make sure the drive is still Ultra DMA 2 when this happens, and it is.
After this happens twice in a row, nero wont even start the burn, it'll come up with a couple of errors just after the "bitsetting set to drive default" message.
Hopefully someone has an idea about what I can do, below is the error message incase anyone understands them.
Thanks
Code:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programs\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.13
Internal Version: 6, 6, 0, 13c
Recorder: <BENQ DVD DD DW1620> Version: B7S9 - HA 1 TA 1 - 6.6.0.13
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <JLMS XJ-HD166S >Version: DS0F - HA 1 TA 0 - 6.6.0.13
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3200826A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : JLMS XJ-HD166S atapi Port 1 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
JLMS XJ-HD166S D: CDRom0
BENQ DVD DD DW1620 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 170MB (174872kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.9.2005
ISO compilation
8:36:55 PM #1 Text 0 File Isodoc.cpp, Line 6194
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:36:55 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
8:36:55 PM #3 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1620 running
8:36:55 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293
First writeable address = 0 (0x00000000)
8:36:55 PM #5 Text 0 File Burncd.cpp, Line 3167
Turn on Disc-At-Once, using DVD media
8:36:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 260
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1785503 (396:46.53, 3487MB)
8:36:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
8:36:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 2339
Recorder: BENQ DVD DD DW1620, Media type: DVD+R
8:36:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:36:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1785504 (1785504) = #1785504/396:46.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1785504 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------
8:36:55 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3656712192, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1785504 | lead-out | 1 | 0x41 | 0x00
8:36:55 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:36:55 PM #13 Text 0 File Burncd.cpp, Line 4051
Cache writing successful.
8:36:55 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:36:55 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
8:36:55 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:36:55 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04500600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
8:36:56 PM #18 CDR -1207 File DVDR.cpp, Line 4786
Book Type automatically set to: Current recorder setting
8:36:56 PM #19 Text 0 File DVDPlusRW.cpp, Line 652
Start write address at LBA 0
DVD high compatibility mode: Yes
8:36:56 PM #20 WINPFILE 2 File winpfile.cpp, Line 274
The system cannot find the file specified.
C:\DOCUME~1\Yim\LOCALS~1\Temp\NERF4520029.avi
8:37:26 PM #21 SCSI -1176 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x04070000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01
8:37:26 PM #22 CDR -1176 File Writer.cpp, Line 311
Session fixation error
8:37:26 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:37:26 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
8:37:27 PM #25 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03
8:37:27 PM #26 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
8:37:27 PM #27 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
8:37:27 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/03/2005 8:28:13 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)