Quote:
|
Originally Posted by ryceboi my drive doesnt even open anymore. when i boot up, the green light flashes for a long time and it slows my start up time. same thing happens when i push the eject button. green light flashes for a while. it all started when i put in a dvd someone else burned, and then it hung up and i couldnt get it open. now it happens all the time. did i break my drive by upgrading firmwares? im using b7v9 right now and ive tried flashing backwards and forwards and nothing is working. please help. |
Just Happen To Me This Morning. (BenQ Would Not Eject)
Burning Movie In Sonic RecordNow 4.61
Failed Half Way Thru Burn With This Error Message:
305 - 20/06/2005 4:06:39 AM |01| Job 1, Host:1 ID:2 (D: ) - Benq DVD DD DW1620 - Recording - Error -10 at Sector 1828656 - Disc Write Error - Command:2A Sense:03 ASC:0C ASCQ:00
207 - 20/06/2005 4:06:39 AM |01| Job 1 Round 1 Terminated - 0 Good Disc(s), 1 Bad Disc(s)
311 - 20/06/2005 4:06:39 AM |01| Job 1 Terminated with errors <<<<<<< 0 Good Disc(s), 1 Bad Disc(s) >>>>>>>
199 - 20/06/2005 4:08:42 AM |00| Sonic RecordNow DX Terminated
The Drive Would No Longer Eject.
Powered Down PC
Removed DVD For Drive Using The Pin Hole Eject.
Reboot PC
BenQ Flashing Green Light For A Long Time As PC Loads OS.
Drive Still Detected In OS
Drive Still Does Not Eject
Booted Into Safe Mode To Flash Firmware To Factory B7T9
Flash Successful
Drive Still Would Not Eject.
Removed Drive Out Of PC To Return To BENQ.
Tried BenQ Drive In My Test Bed PC On The Off Chance (Plus To Double Check)
Drive Now Ejects, Reads And Burns Media.
Put Drive Back Into Original PC All Is Sweet Again.
Go Figure
